![]() At this time this appears to be a permanent solution to the New Pro Controller drift issue. Update: After the fix I played AC:NH for a little more than 3 hours and everything is still absolutely perfect. If it doesn't work the first couple of tries, just give it a few more chances. If you have any questions please ask and I will respond as quickly as possible.Įdit 2: Included clarifications that this works without any connection of the wire to any source.Įdit 3: Tested shutting the console off completely and can confirm the fix still works after powering back on as well.Įdit 4: /u/timmytucker advised me that it took them four or five times to go through this process before the fix took. I hope that this method helps anyone here. Testing both of the sticks.They're PERFECT! Absolutely 0 issues returning to center on either stick. I let it sleep for about a minute and then woke it using the Pro Controller Home button. To confirm that this wasn't a fluke I put the Switch back in Sleep mode and I DID NOT plug the controller into the computer (or anything else, completely wireless) this time. Center, I do it again, Center, and again BOOM! Center! I move the stick around in any directions I can and release it. I selected the Right Stick and it's like I hit the damn lottery! It works! Flawless! Returns to center without any issue just as the Left Stick had done before.Īt this point I'm worried that the left stick is jacked up again so I back out of the Right Stick calibration and I select the Left Stick. I Pressed the Home Button on the controller and immediately navigated to the Thumb Stick Calibration. ![]() Still in HTML5 Controller application I played with the sticks a little (maybe 30 seconds) and then disconnected the Pro Controller again. The Switch is asleep again and I connected the Pro Controller directly into the USB-C that is still connected to the PC. I then tried my Right Stick (also has been giving me issues) and it was still doing the same thing as before. No matter which direction I moved the Left Stick it quickly returned to Center. There was no issue returning to a perfect center state for the stick anymore. I then went to the Calibration page in Settings and went to check the Left Stick. I'm just trying to be absolutely thorough with the actions I took.Īfter that I didn't do anything else except remove the USB-C from the controller and then pressed the Home button to trigger the Switch to wake from sleep. I'm not sure if this had anything to do with anything. It of course did not, it searched (the green lights at the bottom scrolled) and then reconnected to the wired connection on the PC.Īt that point pressed the Home button on the controller a couple times too. I simply plugged it in and pressed the B button to get it to register on the web page.Īfter messing around for about 3 minutes I decided to press the Connect button and hold it on the controller to see if it would connect to the Switch while wired to the PC. When I was doing this I had the Switch in Sleep Mode, I did not connect the controller via Bluetooth to the PC. Has been since the first time I tried the other day and nothing was different. The hardware when testing in this application is absolutely perfect. I have done this before but decided to test again just to see if there was something I may have missed. I attached the controller to my PC (wired) and again went into the HTML5 Gamepad Tester ( link here). Also the right stick would not re-center properly either. I wanted to make a post explaining what I was struggling with pertaining to my new Pro Controller that WAS experiencing a slight SW drift with the left stick.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |